The Ubiquiti LiteBeam 5AC XR (LBE-5AC-XR) was developed to realize high-speed connections over very long distances. The integrated backfire directional antenna has an enormously high performance gain of 29dBi. In this way, data throughputs of more than 450 Mbps can be achieved over long distances according to the airMAXac standard. The ultra-light aluminum alloy and the UV-stabilized polycarbonate make this CPE extremely light, robust and weatherproof. The LBE-5AC-XR is recommended for direct point-to-point operation with a potential range of 30 km.
Integrated Design
Ubiquitis InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC XR is versatile and cost-effective to deploy.
Integrated airMAX Technology
The next generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti’s airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
U Mobile App
The LiteBeam 5AC XR integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Accessing airOS via Wi-Fi The U Mobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). U Mobile allows you to set up, configure, and manage the LiteBeam 5AC XR. It offers the following options once you're connected or logged in to the device:
- Status: Check link status information or the basic configuration settings of the LiteBeam 5AC XR
- Configuration: Change or update the existing configuration of the LiteBeam 5AC XR
- Tools: Access tools for initial installation and configuration of the LiteBeam 5AC XR
- Actions: Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the LiteBeam 5AC XR
Technical Data:
| Manufacturer / Product: | Ubiquiti Networks / LiteBeam 5AC XR |
| Operating System: | AirOS |
| Networking Interface: | 1 x 10/100/1000 BASE-TX (Cat. 5, RJ-45) |
| Frequency Band: | Worldwide: 2412 - 2462 MHz, 5170 - 5875 MHz
USA: 5725 - 5850 MHz
USA: U-NII-2A - 5250 - 5350 MHz
USA: U-NII-2C - 5470 - 5725 MHz
USA: U-NII-3 - 5725 - 5850 MHz |
| Supported Standards: | IEEE 802.11a
IEEE 802.11n
airMAX ac |
| TX Power: | max. 25dBm |
| TCP/IP Throughput: | 450Mbps+ |
| Antenna: | 29dBi 2x2 MIMO Backfire Antenna |
| max. Power Consumption: | 7 Watt |
| Power Method: | Passive Power over Ethernet
24V/0.5A Gigabit PoE Injector is included! |
| Power Input: | 12V - 24V |
| ESD/EMP Protection: | 24KV radio frequency and ethernet electrostatic discharge (ESD) protection. |
| Dimensions: | 74.7 x 52.5 x 34.7cm |
| Weight: | 3.200 kg |
| Operating Temperature: | -40°C to +70°C |
| Operating Humidity: | 5 to 95% non-condensing |
| ESD/EMP Protection: | +- 24 kV |
| Shock and Vibration:: | ETSI300-019-1.4 |
Scope of delivery:
| 1 x Ubiquiti LiteBeam 5AC XR |
| 1 x 24V/0.5A - Gigabit PoE Injector |
| 1 x Mounting Kit |