The access point UniFi nanoHD brings Wave 2 speeds in a compact design for indoor use. Four integrated WiFi antennas allow 4x4 MU-MIMO with a combined data rate of 2033 Mbps in both frequency bands. The UAP has a maximum WiFi data rate of 2033 Mbps in both frequency bands. Up to 200 devices can be connected at the same time.
For high-density environments, use the UAP-nanoHD and build a high-performance WiFi network. Ubiquiti's UniFi WiFi devices are all scalable. This means that you can supply a very large area with a very fast and secure WiFi signal. You can also start with a UniFi access point and continue to expand the system at any time.
The powerful processor allows the nanoHD to handle guest access, filtering, and generally intensive tasks with ease. The UAP nanoHD is powered by PoE. A 48V, 0.5A adapter is included.
UniFi Controller
Use the UniFi controller to centrally configure and control any number of UniFi access points, map your WiFi networks, manage network traffic or integrate new UniFi access points into your network. Using a UniFi controller, several sites can be managed and controlled at different locations. The sites are managed separately from each other so that you have the best possible overview.
Technical Data:
Manufacturer / Model: | Ubiquiti Networks / UniFi UAP nanoHD |
Network Interface: | 1 x 10/100/1000 Ethernet Port |
WiFi frequency band: | 2.4 GHz: 300 Mbps 5 GHz: 1733 Mbps |
WiFi Standards: | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
Beamforming: | Supported |
Power saving mode: | Supported |
TX transmission power: | 2.4 GHz: 23 dBm 5 GHz: 26 dBm |
MIMO: | 2.4 GHz: 2x2 5 GHz: 4x4 |
Antenna: | 2.4 GHz: 2 x 2.8 dBi 5 GHz: 4 x 3dBi |
BSSID: | 8 per Radio |
WiFi Security: | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
max. Power Consumption: | 10.5W |
Power Supply: | 48V PoE - 802.3af/803.2at (Supported Voltage Range: 44 to 57VDC) |
Dimensions: | 16 x 16 x 3,27 cm |
Weight: | 300g (315g with Mounting set) |
Button: | Reset |
Field of use: | Indoor / Outdoor |
Operating Temperatur: | -10°C to 70°C |
Humidity: | 5 - 95% not condensing |
Certificates: | CE, FCC, IC |
Scope of Delivery:
1 x Ubiquiti UniFi nanoHD |
1 x 48V, 0.5A Gigabit PoE Adapter |
1 x Wallmount Set |