The Ubiquiti Networks NanoStation Loco M2 is a powerful, robust and weatherproof 2.4 GHz based CPE. 150+ Mbps real TCP/IP outdoor throughput and up to 5km+ range. Featuring 2x2 MIMO technology, the new NanoStation Loco M2 links significantly faster and farther than ever before.
New Leading-Edge Industrial DesignThe original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation Loco M2 take the same concept to the future with new redesigned sleek and elegant form-factors.
Next-Gen Antenna DesignThe integrated, dual-polarized directional antennas have a gain of 8dbi with optimized cross-polarity isolation and small size.
Passive PoEUsing PoE technology allows to transmit data stream and power / energy through the enthernet cable which integrates the LocoM2 to your network enviroment. There is no need to to install any extra wired power cord. A 24V, 0.5A PoE Injector is included.
AirOS VUbiquiti AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.
Technical Data:
Manufacturer / Product: | Ubiquiti Networks / NanoStation Loco M2 |
Processor Specs: | Atheros MIPS 24KC, 400MHz |
Memory Information: | 32MB SDRAM, 8MB Flash |
Operating System: | AirOS 5 |
Networking Interface: | 1 x 10/100 BASE-TX (Cat. 5, RJ-45) |
Frequency Band: | 2.4 GHz (Standard) |
Supported WLAN Standards: | IEEE 802.11b: 11 Mbps IEEE 802.11g: 54Mbps IEEE 802.11n: 150Mbps |
TX Power: | max. 23dBm |
RX Sensitivity: | min. -96dBm |
Range: | 5+ km |
TCP/IP Throughput: | 150Mbps+ |
Antenna: | 8dBi Dual-Pol MIMO Panel Antenna |
Beam: | 60° Horizontal - 60° Vertical |
max. Power Consumption: | 5.5 Watt |
Power Input: | 12V-24V |
Power Method: | Passive Power over Ethernet |
Appliance: | In- and Outdoor |
Dimensions: | 16.3cm x 3.1cm x 8cm |
Weight: | 0.18 kg |
Operating Temperature: | -30°C to +80°C |
Operating Humidity: | 5 to 95% non condensing |
Scope of delivery:
1 x Ubiquiti 2.4 GHz NanoStation Loco M2 |
1 x 24V, 0.5A passive PoE Injector |