This WiFi bridge set consists of two NanoStation 5AC Loco. The components are delivered either unconfigured or preconfigured (plug & play). The NanoStation 5AC Loco achieves real data throughputs of up to 450Mbps. Thanks to the integrated 13dBi directional antenna, distances of up to 10km can be bridged in point-to-point operation under optimal conditions. By using this set you get a reliable data connection between two endpoints.
Next-Gen Antenna DesignThe new antenna design features 13dBi gain at 5GHz. With optimized cross-polarity isolation and in a compact form-factor.
Passive PoEUsing PoE technology allows to transmit data stream and power / energy through the enthernet cable which integrates the NanoStation Loco AC to your network enviroment. There is no need to to install any extra wired power cord. A PoE Injector is NOT included.
AirOS SoftwareAirOS is the intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training operate. Behind the user webinterface is a powerful firmware architecture which enables hi-performance networking. Additionally, the AirControl application allows operators to centrally manage 100's of devices.
Technical Data:
Manufacturer / Product: | ">Ubiquiti Networks / NanoStation Loco 5AC (Loco5AC) |
Processor Specs: | Atheros MIPS 74Kc, 560 MHz |
Memory Information: | 64 MB DDR2 |
Operating System: | AirOS 8 |
Networking Interface: | 10/100/1000 Mbps Ethernet Port |
Frequency Band: | 5 GHz |
Supported WiFi Standards: | IEEE 802.11ac: 450 Mbps |
RX Sensitivity: | min. -96dBm |
TCP/IP Throughput: | 450Mbps+ |
Gain: | 13dBi |
Channel Bandwidths: | 10/20/30/40/50/60/80 MHz |
Beamwidth: | 45° Horizontal - 45° Vertical |
max. Power Consumption: | 8.5 Watt |
Power Input: | 24V, 0.5A Gigabit PoE |
Power Method: | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Appliance: | In- and Outdoor |
Dimensions: | 17,9cm x 7,75cm x 5,91cm |
Weight: | 0.18 kg |
Enclosure: | Outdoor UV Stabilized Plastic |
TX Power: | max. 25dBm |
RoHS Compliance: | Yes |
Operating Temperature: | -40°C to +70°C |
Operating Humidity: | 5% to 95% Condensing |
ESD/EMP Protection: | ±24kV Contact/Air |
Shock and Vibration: | ETSI300-019-1.4 |
Certifications: | CE, FCC, IC |
Scope of delivery:
2 x Ubiquiti NanoStation 5AC Loco (NS-5ACL) |
2 x Zip Tie |
2 x Quick Start Guide |