TELTONIKA RUTX12 Dual LTE CAT 6 router is designed for mission critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. 5 x Gigabit Ethernet ports, Wave2 802.11ac Dual Band WiFi, Bluetooth LE and USB interfaces with RutOS software and security features make this device irreplaceable in applications where loosing connection is not an option. The RUTX12 can be easily managed using the TELTONIKA RMS system.
The two integrated LTE modems of the TELTONIKA RUTX12 allow a constant LTE connection with transmission rates of up to 300 MBit down- and 50 MBit upload in LTE / 4G mode (according to CAT6 standard) and 42 MBit down - and 5.76 MBit upload (according to DC-HSPA + standard) in 3G operation. The integrated load balancer allows the simultaneous use of both connections. A total capacity of 600 MBit down and 100 MBit upload can be achieved. The SIM card slots can be equipped with a SIM card from any provider. For example, you can use two SIM cards from different providers and thus avoid connection failures due to insufficient network coverage of one provider.
With the integrated high-speed 802.11ac / Wave2 dual-band Wi-Fi access point, data rates of up to 867 Mbit are available. The RUTX12 also has an integrated 5-port Gigabit Ethernet switch.
The user-friendly web interface allows all users to comfortably configure the router. The RUTX12 can also be managed using the TELTONIKA RMS system.
The rugged aluminum housing, solid engineering and the firmware ensure consistent performance and durability of TELTONIKA RUTX12.
Technical Data:
| Manufacturer / Model: | TELTONIKA / RUTX12 |
| Modes: | Router, NAT Router, Bridge, PPPoE Client |
| Processor: | Quad-core ARM Cortex A7, 717MHz |
| Memory: | 256MB, DDR |
| FLASH memory: | 256MB SPI Flash |
| Integrated LTE Modems: | 2 |
| Frequency: | LTE FDD B1, B3, B5, B7, B8, B20, B28, B32 LTE TDD: B38, B40, B41 3G: B1, B3, B5, B8 |
| Bandwidth 4G: | Download: 300Mbps (CAT6) Upload: 50 Mbps |
| Bandwidth 3G: | Download: 42Mbps Upload: 5.76Mbps |
| 4G/3G Antenna: | 4 x 3dBi Omni Antenna |
| GPS: | GPS, GLONASS, BeiDou, Galileo and QZSS |
| WLAN: | IEEE 802.11b (11 Mbps) IEEE 802.11g (54 Mbps) IEEE 802.11n (300 Mbps) IEEE 802.11ac (867 Mbps) |
| Security: | WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
| WiFi Antenna: | 2 x Dualband Omni Antenna (RP-SMA) |
| Features: | NAT, DHCP Server/Client, Virtual Server, Port Forwarding, QOS, DMZ Host, Firewall mit IP-, MAC und Domain-Filter, OpenVPN, PPTP, L2TP, IPsec, VRRP, GRE Tunnel, SMS Control, DynDNS, RMS support, Input Triggers, Samba Share, Load Balancer |
| Interfaces: | 1 x USB 2.0 (A) |
| SIM Interface: | 2 x Standard Mini-SIM Slot |
| WAN Interface: | 1 x 10/100/1000 Mbps WAN Port |
| LAN Interface: | 4 x Gigabit RJ45 Ports (Auto MDI-X, Auto-Negotiation) |
| Power Supply: | 9-50V |
| Power consumption: | max. 22W |
| Appliance: | Indoor |
| E-mark certification: | Yes |
| Dimensions: | 13.2 x 9.5 x 4.4 cm |
| Casing: | Aluminium |
| Weight: | 540g |
| Operating temperature: | -40°C to 70°C |
| Humidity: | 10% ~ 90% non condensing |
Scope of delivery:
| 1 x TELTONIKA RUTX12 4G Router |
| 4 x 3dBi 3G/4G Antenna (SMA) |
| 2 x Dualband WiFi Antenna (RP-SMA) |
| 1 x Bluetooth Antenna (RP-SMA) |
| 1 x GPS Antenne (SMA) |
| 1 x 1m CAT5e Ethernet cable |
| 1 x 12V/1.5A Power Supply with terminal block |
| 1 x Manual |
