SUNHANS | 2.4 GHz WiFi Booster / Amplifier, 2x2 MIMO, 300Mbps, 1000mW, 6dBi Antenna

This is a 2x2 MIMO WiFi booster from SUNHANS in the 2.4 GHz frequency range with a TX power 1000mW / 30dBm. Increase your transmitter power and receiving sensitivity of your Wifi device. Two Wifi antennas with a gain of 6dBi and two 30cm connection cables with a RP-SMA connector is included. The SUNHANS is made for indoor appliance and has the dimensions of 8.5cm x 7cm x 2cm with a weight of 180g.
ART5496 SH24Gi1000-D2
89,99 €
Out of stock
incl. 19% VAT , plus shipping costs (Standard)
  • Currently out of stock

This WiFi Booster is especially designed for 2.4 GHZ MIMO (2Tx2R) IEEE 802.11n (Draft 2.0) Standard. It amplifies the TX output power of your WiFi device up to 1000mW and increases the range, coverage, strenght and stability of your WiFi network.

The WiFi booster works bi-directional (TX/RX) and amplifies both, the transmitter power (TX) and receiving sensitivity (RX) of your WiFi device. You can either use this WiFi amplifier on base stations like WiFi routers, WiFi access points, WiFi repeaters or on client stations like WiFi USB dongles, WiFi PCI cards.

It is not necessary to install any driver or do any configuration. Just connect the booster to the to the external antenna sockets of your WiFi device. Thats it!

Technical Data:

Product:WiFi Booster
Supported Standards:IEEE 802.11 b/g/n (2Tx2R)
Modulations:DSSS, CCK, OFDM
Frequency:2400 - 2485 MHz
Impedance:50 Ohm
RF Output power:1000mW [30dBm]
Transmit Gain:13dB
Receiver Gain:10dB
Input Trigger Power:min. 0dBm
max. 20dBm (100mW)
Noise factor:3.5dB (typical)
Switching:=1 µs
Signal Input Connector:2 x SMA female socket
Signal Output Connector:2 x RP-SMA male socket
Operating Temp.:0°C bis +40°C
Operating Humidity:up to 95° rel. humidity
Dimensions:8.5 x 7 x 2cm

Scope of Delivery:

1 x 2.4 GHz 1000mW MIMO WiFi Booster
2 x 6dBi WiFi Antenna
2 x 30cm RP-SMA Connection Cable
1 x 12V /2.5A Power Supply (EU)

Contact data