MikroTik Wireless

The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, PoE and power jack. In addition to using this device as a small and portable AP, it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device. The microUSB port can also be used to connect a 4G USB modem and make the mAP a 4G router.

The MikroTik hAP lite (RB941-2ND) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password, has an integrated 10/100 4-Port ethernet switch and a Level 4 RouterOS license.

This small home access point MiktoTik hAP (RB951Ui-2nD) is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. The hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The RB951Ui-2HnD is a SOHO (Small office / home) WiFi Access Point with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless access point with WiFi antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for Ethernet-Port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The hAP ac lite (RB952Ui-5ac2nD) is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for USB 4G modem and a RouterOS L4 license. The omnidirectional antennas allow to mount the hAP ac lite in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

The MikroTik hAP ac lite TC (RB952Ui-5ac2nD-TC) is a 802.11ac Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for USB 4G modem and a RouterOS L4 license. The design of the Mikrotik hap ac Lite TC allows it to be positioned either horizontally or vertically in the office or at home. A wall mounting kit is also included.

The hAP ac is a universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2.4 GHz 802.11 b/g/n and 5 GHz a/n modes. The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location. Other helpful features include a USB port for attaching storage or a 4G modem, PoE out and an SFP cage, for connecting active or passive optical network modules.

The MikroTik hAP ac2 (RBD52G-5HacD2HnD-TC) is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE USB modem, and device supports IPsec hardware acceleration. New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

MikroTik hAP ac3 is a dual-band access point that simultaneously offers 802.11ac Wi-Fi coverage for 2.4 GHz and 5 GHz frequencies - With 5 Gigabit Ethernet ports, 256 MB of RAM and quad-core CPU, hAP ac3 can satisfy even the biggest and most demanding households. With PoE support, it can power or be powered by other devices. There is a 128 MB NAND and a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included.

It's time to supercharge your home network with the Generation 6 wireless network and our latest addition to the beloved hAP series. The MikroTik hAP ax2 has everything you might need in a primary home access point - and more! Forget endless reviews and comparisons - this is the perfect device for 99% of homes. The modern quad-core CPU running at 864 MHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with the most advanced RouterOS features. And with the addition of WPA3 advanced encryption support, you’re safer than ever before. The hAP ax2 has a total bandwith of 1774 Mbps.

MikroTik wAP ac is a WiFi accesspoint with full RouterOS capabilities. The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. Of course, this 802.11ac access point can also be used indoors and is also fully compatible with older WiFi standards.

MikroTik wAP ac (RBwAPG-5HacD2HnD) is a Wifi accesspoint with full RouterOS capabilities. The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. Of course, this 802.11ac access point can also be used indoors and is also fully downward compatible with older WiFi standards.

The cAP (RBcAP2nD) is the first Mikrotik dual-stream AP operating in the 2.4 GHz frequency band. The timeless design makes the device harmonize with the decor of many rooms. This access point is perfect for both home and hotel business, airports, shopping malls, etc. The cAP can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

The cAP ac (RBcAPGi-5acD2nD) is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2.4 GHz 802.11b/g/n and 5 GHz in a/n/ac standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

The cAP ac XL (RBcAPGi-5acD2nD-XL) is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2.4 GHz 802.11b/g/n and 5 GHz in a/n/ac standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac XL supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

MikroTik cAP ax (cAPGi-5HaxD2HaxD) is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2.4 GHz 802.11b/g/n(ax and 5 GHz in a/n/ac/ax standards, and will provide coverage in 360 degrees. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ax supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

MikroTik Groove 52HPn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has a 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2.4 or 5GHz wireless mode, and high 500mW output power!

MikroTik Groove 52HPacn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4 GHz or 5 GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.

MikroTik GrooveA 52HPacn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4 GHz or 5 GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless. This version can also operate Accesspoint-Mode. A dualband WiFi omni Antenna is included.

MikroTik Metal 52 ac is a completely waterproof and rugged outdoor wireless device with a super high output power.Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4 GHz or 5 GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless.

MikroTik OmniTIK 5 is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for SXT, or for any other 802.11 standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbps aggregate throughput.

OmniTIK 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.

BaseBox 2 is a weatherproof 2.4GHz WiFi accesspoint from MikroTik based on the RouterBoard RB912. The maximum TX-Power is 30dBm / 1000mW and on the top are two RP-SMA connectors which are both weatherproof. At the bottom side is a USB-Port and a Gigabit Ethernet-Port.

MikroTik BaseBox 5 is a weatherproof WiFi accesspoint based on the RB912 RouterBoard. The maximum TX-Power is 30dBm / 1000mW and on the top side are two RP-SMA connectors which are both weatherproof. At the bottom is a USB-Port and a Gigabit Ethernet-Port. The RouterBoard RB912UAG-5HPnD-OUT has an Atheros CPU with 600MHz.

Netbox 5 is a robust and weatherproof 5GHz WiFi access point from MikroTik supporting the 802.11ac standard for wireless speeds up to 866 Mbps. The enclosure is made of plastic and can be used outdoors. There are two external RP-SMA connectors on the top of the access point.

MikroTik NetMetal 5 SHP is a high power 2x2 dual chain 802.11ac wireless access point with two RP-SMA connectors for external antennas. Thanks to the 802.11ac WiFi standard and the 256-QAM modulation the NetMETAL 5SHP peaks at data rates of 1.3Gbps.

MikroTik NetMetal 5 (Model: RB922UAGS-5HPacD-NM) version is equipped with a high power 2x2 dual chain 802.11ac wireless radio and two RP-SMA connectors for external WiFi antennas. It has an additional miniPCI-express slot which can be used for a 3G/4G modem or an additional wireless card,

The NetMETAL 5 / RB922UAGS-5SHPacT-NM is a completely new 802.11ac product in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for it’s high output power radio.

MikroTik LHG 2 is a 2.4GHz WiFi CPE with a powerful, dual polarized 18dBi Grid Antenna. This is perfect for point-to-point connections over long distances. The MikroTik LHG 2 uses the NV2 TDMA protocol and is designed for outdoor use.

The LHG5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The LHG 5ac is a compact and light 802.11 ac wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and is specially desiigned for outdoor appliances.

MikroTik SXTsq 5 ac (RBSXTsqG-5acD) is a 802.11ac based CPE with a built-in, dual polarized 16dBi panel directional antenna. This is perfect for high-performance point-to-point or point-to-multipoint connections on medium distances with high TCP / IP data throughput. MikroTik SXTsq 5 ac is designed for outdoor use.

The RBwAPG-60ad kit from MikroTik is low cost Point-to-Point Set in the 60GHz frequency range with 1Gbps that can reach distances up to 200m. A gigabit lan port is available under the device und can also be used to power the device with an ethernet cable (12 V - 57 V, 802.3af/at). Unlike in other PtP Sets you dont need to configure the RBwAPG-60ad with each other. This is a complete package.

MikroTik RBLHGG-60adkit is low cost Point-to-Point Set in the 60GHz frequency range with 2GBit/s throughout that can reach distances up to 1.5km. Unlike in other Sets you don't need to configure the RBLHGG-60ad Kit. It is already preconfigured and can be used plug & play. We recommend to use this set for distances up to 800m with no obstacles in its way.

MikroTik nRAYG-60adpair set is a very affordable point-to-point WiFi solution in the 60GHz frequency range with 2Gbps data throughput and a range of 1.5km. The improved snow-resistant design is perfect for extreme weather conditions. Unlike other sets, you do not need to configure the MikroTik nRAYG-60adpair Kit, as it is already preconfigured.

Mikrotik Wireless Wire CubeG-5ac60adpair is available for download at 60 GHz. The bridge achieves a throughput of 2GBit at distances of up to 800m. A two-component package, Building-to-Building Bridge includes everything you need to get the radio link up and running in minutes.