Others

This is a robust magnet base with RP-SMA male / female connectors. The magnet base is designed for use with a WiFi antanna. It has a RP-SMA female socket on its top where you can simply connect your WiFi antenna to. The 1.5m antenna cable has a RP-SMA male connector which will be connected to the external antenna connector of your WiFi device. Bring your WiFi antenna to a optimal position to improve the quality of your wireless connection.

This is a robust magnet base with two RP-SMA male / female connectors. The magnet base is designed for use with two WiFi antannas. It has two RP-SMA female sockets on its top where you can simply connect your WiFi antennas to. The 1.5m antenna cables have a RP-SMA male connector each which will be connected to the external antenna connectors of your WiFi device. Bring your WiFi antenna to a optimal position to improve the quality of your wireless connection.

This is a robust 3x3 MIMO magnet base with three RP-SMA male / female connectors. The magnet base is designed for use with three WiFi antannas. It has three RP-SMA female sockets on its top where you can simply connect your WiFi antennas to. The 1.5m antenna cables have a RP-SMA male connector each, which will be connected to the external antenna port of your WiFi device. Bring your WiFi antennas to a optimal position to improve the quality of your wireless connection.

ALFA APOE03 Power over Ethernet (PoE) Passive Injector delivers both data and electrical power to passive PoE devices using a single Ethernet cable. Using PoE you eliminate the need to place an Ethernet device, such as a wireless access point or IP Camera giving you more freedom.

ALFA APOE03G Power over Ethernet (PoE) Passive Gigabit Injector delivers both data with Gigabit speed and electrical power to passive PoE devices using a single Ethernet cable. Using PoE you eliminate the need to place an Ethernet device, such as a wireless access point or IP Camera giving you more freedom.

This passive PoE injector supplies your PoE capable devices with energy using a standard Ethernet cable. The unused wires of the network cable are used to transmit the voltage. The power LED reliably indicates whether the injector is in operation. The appropriate power supply unit is connected to the injector via a DC connection socket.

This passive Gigabit PoE injector supplies your PoE capable devices with energy using a standard Ethernet cable. The unused wires of the network cable are used to transmit the voltage. The power LED reliably indicates whether the injector is in operation. The appropriate power supply unit is connected to the injector via a DC connection socket.

4 Port Gigabit Ethernet PoE Injector - 802.3af and 802.3at compliant: Gigabit PoE injector supplies your PoE capable devices with energy using a standard Ethernet cable.The power LED reliably indicates whether the injector is in operation. The appropriate power supply unit is connected to the injector via a DC connection socket.

Easy solution to connect a standard 12V device to the 12V system of a caravan or boat without cutting any cable of any power supply!

The self-vulcanizing PIB tape (SCAPA 2504) is ideal for sealing sensitive plug connections outdoors. For example, the plug connection between antenna cable and antenna can be perfectly sealed.

Universal 12V, 1A power supply with 5.5/2.1mm low voltage connector.

Universal 18V, 1A power supply with 5.5/2.1mm low voltage connector.

Universal 24V, 1A (24 Watts) power supply with 5.5/2.1mm low voltage connector.

Extend with the DA-70130-4 your max. 2.0 USB cable length up to 20 meters. A maximum of 3 repeater cables can be connected together with speeds of up to 480 Mbps. Thanks to the shielding it is protected against electromagnetic interference. The included cable is 5 meters long.

Extend your 2.0 USB cable length up to 60 meters using the LogiLink UA0092 USB repeater cable. A maximum of 5 repeater cables (5 x 12 meters) can be used while having full performance of up to 480 Mbps. Thanks to the shielding it is protected against electromagnetic interference.

This is a 1.5m DC connection cable / adapter cable with 5.5 / 2.1 mm low voltage connector. The other end of the cable is bare and tinned. The connection cable is very well suited for the connection to 12V electrical systems of your car, camper, caravan, yacht and many more.

This is a 1.5m DC connection cable / adapter cable with 5.5/2.1 mm barrel connector and 12V vehicle connector. The connection cable is very well suited for the connection to 12V electrical systems of your car, camper, caravan, yacht and many more.

Ubiquiti Instant Indoor Gigabit PoE Converter / INS-3AF-I-G transforms almost any Ubiquiti PoE device into a fully compliant, 802.3af compatible product.

The weatherproof Instant 802.3af Gigabit PoE Converter / INS-3AF-O-G transforms almost any Ubiquiti PoE (Power over Ethernet) device into a fully compliant, 802.3af compatible product.

The industrial kit is designed for use with TELTONIKA RUT230, RUT240, RUT500, RUT550, RUT900, RUT900, RUT950, RUT955 3G / 4G router. It allows you to mount your TELTONIKA router on a standard industrial DIN rail system.

This compact plastic DIN Rail adapter for TELTONIKA RUT2XX, RUT9XX allows you to mount your TELTONIKA router on a standard industrial DIN rail system.

Surface mounting kit allows you to mount your TELTONIKA router on flat surfaces.

The adaptor consists of a flat plastic pad with a 50 cm cable that terminates in a SMA (female) connector. The plastic sleeve, that looks like a cell phone battery, encloses a device that can couple to a cell phone and divert it to a booster antenna thereby ensuring better reception. The pad of the coupler is placed against the top of the phone. (The coupler is supplied with a small piece of Velcro that you can use to ensure a more secure connection to your phone). You then connect the other end of the coupler to one of our booster antennas via the SMA (female) connector. The booster antenna can be mounted on the outside of a building and pointed in the direction of your closest cellular base station to ensure good reception.

Introducing the Ethernet Surge Protector, model ETH-SP-G2, from Ubiquiti Networks. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network.

The SVC ECO 430 PRO is a compact UPS / power bank that provides various options for an uninterruptible power supply. The UPS offers a 5V USB port and three DC outputs (5V, 9V, 12V) - a special feature is the integrated passive PoE injector. The ECO 430 PRO can also supply end devices via either 15V or 24V PoE. The integrated lithium iron phosphate battery (LiFePO4) has a capacity of 7200mAh hours and a maximum output power of 30W. The ECO 430 PRO can be used as a UPS in stationary operation or as an external energy source in mobile use.

The SVC ECO PLUS 8100 is a UPS / power bank that provides various options for uninterrupted energy supply. The UPS offers two 5V USB ports and six DC outputs (9V, 12V) - a special feature is the integrated passive PoE injector. The ECO PLUS 8100 can also supply end devices via either 15V or 24V PoE. The integrated lithium iron phosphate battery (LiFePO4) has a capacity of 14400mAh hours and a maximum output power of 100W. The ECO PLUS 8100 can either be used as a UPS in stationary operation or as an external energy source in mobile use.