The ALFA Tube 2HP is a powerful, weatherproof WiFi Accesspoint / CPE. It supports datarates up to 150Mbps (IEEE 802.11b/g/n). Its Atheros AR9331 chipset has a high gain TX power of up to 500mW (27Bm) and a good RX sensitivity.
The ALFA Tube-2HP has an external N male antenna connector which allows it to combine the Tube 2HP with any kind of WiFi antenna with N female connector. The Tube 2HP will be directly connected to the antennas N female connector. We offer various kinds of WiFi antennas which can be combined with this high gain outdoor WiFi Accesspoint / CPE.
The combination of the high TX power, the good RX sensitivity and the external WiFi antenna allows you to cover huge areas with a WiFi signal or to build up connections on long distances.
The Tube will be simply connected to your PC/Notebook/Netbook or network using a standard ethernet cable. The power supplication of the ALFA Tube 2HP is done by passive Power over Ethernet (PoE) technique. This method allows you to transmit the needed power through the ethernet cable which is used to connect the Tube2HP to your network. You do not need to install any wired power cord. The PoE Injector is NOT included. Compatible PoE Injectors are available at out webshop.
The ALFA Tube2HP will be configured through its webinterface using an internet browser. It is compatible to any operating System.
|Manufaturer / Model:||ALFA Networks / Tube-2HP|
|Frequency:||2.4 GHz (Standard)|
|Supported WiFi Standards:||IEEE 802.11b: 11 Mbps|
IEEE 802.11g: 54 Mbps
IEEE 802.11n: 150 Mbps
|TX Power:||max. 27dbm|
|RX Sensitivity:||-95dBm@11Mbps |
|Operating Modes:||Accesspoint, Client|
|Security:||64/128bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)|
|Channels:||USA 11, Europa 13|
|Antenna connector:||N male connector|
|Appliance:||In- and Outdoor (IP68)|
|Ethernet Interface:||1 x 10/100 BASE-T RJ-45|
|Power Method:||PoE 802.3af / at|
|Operating Temperature:||-20°C bis +65°C|
|Humidity:||5% to 90% non-condensing|
Scope of delivery:
|1 x ALFA Tube-2HP Outdoor WiFi AP / CPE|