ALFA Networks 4G CAMP PRO 2+ – Use all three of these components above together to boost and convert a 4G signal to a Wi-Fi signal. Simply connect your computer to the R36A via ethernet cable for a one-time configuration and setup. Put a SIM-card to the Tube-4G (make sure the SIM-card is on a 4G plan or recharged). Connect the AOA-M4G antenna to the Tube-4G receiver and then connect the Tube-4G to the USB port on the R36A. Use the Wi-Fi scanning software built-into the R36A that you will see during the setup wizard, so you can scan for and connect to the new wireless networks in your area. Once the R36A has connected to a network, you will be prompted to name and password protect your own new local Wi-Fi network, offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.
There is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network, such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use, the Camp Pro may not work well there.
Scope of delivery:
1 x ALFA Tube-4G incl. 8m USB Cable |
1 x ALFA R36A incl. 5dBi Omni Antenna |
1 x ALFA 4G Outdoor Antenna |
1 x 230V EU Power Supply (12V/1A) |
1 x 12V Car Charger |
1 x Ethernet Cable, Waterproof Tape, Plastic Strips |