• +49-(0)40-605902410
Ubiquiti airFiber 24 HD / AF-24HD | 24 GHz, 2 Gbps, HDD, PtP / Carrier Class

Item number: ART5911

The heavy-duty Ubiquiti AF-24HD provides a throughput up to 2 Gbps and a range of up to 20+ km. Featuring INVICTUS custom silicon for 2+ million packets-per-second processing, the airFiber24HD is ideal for outdoor, PtP bridging and backhaul applications requiring maximum performance.

Category: airFiber Components


3.119,99 €

including 19% VAT. ,(Kein Express)

Available now!

Shipping time: 1 - 3 workdays

pcs


Featuring INVICTUS custom silicon for 2+ million packets-per-second processing, the airFiber 24HD is ideal for outdoor, PtP bridging and backhaul applications requiring maximum performance. Featuring the world's best unlicensed-band spectral efficiency at 15.9 bps/Hz, the airFiber24 HD supports the dense modulation rates, up to 256QAM, that are required for high data rates, up to 2 Gbps.

Proven Links: 20+ km

The airFiber 24 HD features the most powerful automatic compensation for path loss degradation due to rain fade, so it provides the best range ? up to 20+ km ? among 24 GHz products and allows for constellation threshold extension.

Low-Latency Carrier Backhaul

The airFiber 24-HD supports FDD (Frequency Division Duplexing) in full-duplex mode for 0.2 millisecond latency, resulting in increased efficiency for carrier-class network backhauls.

24 GHz Unlicensed Band

The airFiber24 HD operates in worldwide, license-free, 24 GHz frequencies. Users can deploy airFiber24HD almost anywhere they choose (subject to local country regulations).

Efficient by Design

Every detail of airFiber was designed and engineered by the Ubiquiti R&D Team. From the silicon chip up to the innovative split-antenna architecture, the Ubiquiti R&D Team created airFiber to deliver superior throughput with efficiency. airFiber was purpose built to create a high performance backhaul.

Plug and Play Deployment

Based on Ubiquiti's innovative and intuitive airOS, the airFiber Configuration Interface enables quick deployment. With installation efficiency in mind, the mechanical design allows easy installation by one person. A two person installation crew can effectively install and align an airFiber link. To fine-tune the alignment, the received signal levels can be conveniently accessed via any of these methods:

  • airFiber LED display
  • airFiber Configuration Interface
  • Audio tone feature

Innovative Proprietary Modem Technology

Ubiquiti's innovative proprietary modem technology was purpose-built to address the specific challenges of outdoor, PtP (Point-to-Point) bridging and high-performance network backhauls. Every aspect of the radio has been carefully simulated and designed to optimize range, speed, and latency performance in the harshest RF noise environments.

Synchronous Data Transmission and Reception

Conventional wireless standards impose a latency by having to receive a packet before a packet is transmitted. airFiber can transmit data synchronously without any wait time. airFiber features traditional TDD and FDD modes of operation in addition to the proprietary Hybrid Division Duplexing (HDD) mode, which provides a breakthrough in range and spectral efficiency performance. Based on the ranging algorithm built into the air protocol, the airFiber radios use patent-pending HDD technology to calculate the propagation delay and know when each radio can transmit and receive, so they send packets in precise synchronization.



Technical Data:

Manufacturer / Product:Ubiquiti Networks / AirFiber 24HD
Frequency:24.05 - 24.25 GHz
Maximum Throughput:2 Gbps
Maximum Range:20 km
Packets per Second:1 Million+
Antenna:33dBi TX / 40dBi RX Directional Antenna
Polarisation:Dual-Slant Polarization
Cross-pol Isolation:28dB min.
Front-to-Back Ratio:70dB
Beamwidth: 3.5°
Networking Interface:1 x 10/100/1000 BASE-TX (Cat. 5, RJ-45)
Configuration Interface:1 x 10/100 BASE-TX (Cat. 5, RJ-45)
Auxiliary Port:1 x RJ-12, Alignment Tone Port
max. Power consumption:50W
Power Input:42-58V DC
Power Input Method:Power over Ethernet
Dimensions:59.3 x 76.8 x 37 cm
Weight:17.3 kg
Operating Temperature:-40°C bis +55°C
Operating Humidity:5 to 95% no condensing


Scope of delivery:

1 x Ubiquiti AirFiber 24 HD
1 x Mounting-Kit
1 x 50V, 1.2A PoE GigE Adapter


Shipping weight:35,00 Kg
Product weight: 17,30 Kg

Technical Datasheet

Please login first to add a tag.