The Rocket 2AC PRISM is ideal for deployment in Point-to-Point (PtP) and Point-to-Multipoint (PtMP) applications requiring maximum performance. You have the freedom to locate, deploy, and operate the Rocket 2AC PRISM anywhere in the world. It allows for a high degree of flexibility in configuring channel bandwidths: 10, 20, 40 and/or 40 MHz, depending on local country regulations.
The Rocket2AC PRISM only works with other airMAX AC devices!
It features incredible range performance of up to 50+ km and a breakthrough speed of up to 330+ Mbps real TCP/IP throughput.
The Rocket 2AC PRISM radio can be paired with a RocketDish or Sector AC antenna to create the endpoint of a high-performance backhaul.
High data rates require a high Signal to Noise Ratio (SNR), which is challenging to achieve, especially in noisy, high density areas. Integrated into Ubiquiti's custom silicon, AirPRISM technology creates a high SNR by isolating signals within the operating channel and rejecting interference using specialized circuitry, the High Selectivity Receiver (HSR).
Depending on the operating mode, available channel widths include 10, 20 and/or 40 MHz. Theoretically APs operate on different channels; however, because of the wider channel bandwidths, there can be overlap in spectrum usage. airPrism technology removes up to an additional 30+ dB of adjacent channel interference through the active filtering design, so an airMAX ac AP with airPrism technology can provide significantly greater performance than a typical AP.
Co-location is vital in many scenarios. For example, a WISP may have limited tower space, so it must co-locate all APs within that allotted footprint. Shielding and other means can lessen interference but may be impractical. By deploying airMAX ac APs with airPRISM technology, you can co-locate APs and enhance the overall performance of your wireless network.
Rocket 2AC-PRISM has integrated Ubiquiti airSYNC technology. airSync enhances the hardware and software of the Rocket to utilize GPS signals for precision timing. GPS Signal Reporting airOS was upgraded to take full advantage of the new GPS hardware in the Rocket 2AC PRISM. Easily manage and monitor GPS satellite signals. No Co-Location Interference Synchronized transmission among Rocket2AC-PTP stations effectively eliminates co-location interference.
Power over Ethernet
The power supplication of the Rocket 2AC PRISM is done by passive Power over Ethernet (PoE) technique. This method allows you to transmit the needed power for the Rocket through the Ethernet cable which is used to connect the Rocket 2AC to your network. You do not need to install any wired power cord. The PoE Injector is included.
Version 8 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.
- Sector AM-2G15-120
- Sector AM-2G16-90
- Sector AM-V2G-Ti
- Omni AMO-2G10
- Omni AMO-2G13
- Dish RD-2G24
|Manufacturer / Product:||Ubiquiti Networks / Rocket 2AC PRISM|
|Processor Specs:||MIPS 74Kc|
|Memory Information:||128 MB DDR2 SDRAM, 16 MB NOR FLASH|
|Networking Interface:||1 x 10/100/1000 BASE-TX (Cat. 5, RJ-45)|
|Frequency Band:||Worldwide: 5150 - 5875 MHz|
USA: 5725 - 5850 MHz
|WiFi Standards:||airMAX ac|
|TX Power:||max. 27dBm|
|RX Sensitivity:||min. -96dBm|
|Link Type:||PTP / PTMP|
|Channel Size:||PTP: 10/20/40 MHz |
PTMP: 10/20/40 MHz
|Antenna Connector:||2 x RP-SMA antenna connector (WIFI), 1 x SMA antenna connector (GPS)|
|max. Power Consumption:||+.5 Watt|
|Power Input:||24V, 0.5A Gigabit PoE|
|Power Method:||Passive Power over Ethernet Injector |
(24V, 0.5A Injector included)
|Dimensions:||8.8 x 4 x 23 cm|
|Appliance:||In- and Outdoor|
|Operating Temperature:||-40°C to +70°C|
|Operating Humidity:||5% to 95% non condensing|
Scope of delivery:
|1 x Ubiquiti Rocket 2AC PRISM|
|1 x GPS Antenna|
|1 x Power over Ethernet (PoE) Injector / Power Supply|
|Shipping weight:||0,80 Kg|
|Product weight:||0,69 Kg|