Ubiquiti NanoStation Loco M2 / LocoM2 - 2.4GHz WiFi CPE
The Ubiquiti Networks NanoStation Loco M2 is a powerful, robust and weatherproof 2.4 GHz based CPE.
150+ Mbps real TCP/IP outdoor throughput and up to 5km+ range. Featuring 2x2 MIMO technology, the new NanoStation Loco M2 links significantly faster and farther than ever before.
New Leading-Edge Industrial Design
The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation Loco M2 take the same concept to the future with new redesigned sleek and elegant form-factors.
Next-Gen Antenna Design
The integrated, dual-polarized directional antennas have a gain of 8dbi with optimized cross-polarity isolation and small size.
Using PoE technology allows to transmit data stream and power / energy through the enthernet cable which integrates the LocoM2 to your network enviroment. There is no need to to install any extra wired power cord. A 24V, 0.5A PoE Injector is included.
Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.
|Manufacturer / Product:||Ubiquiti Networks / NanoStation Loco M2 / LocoM2|
|Processor Specs:||Atheros MIPS 24KC, 400MHz|
|Memory Information:||32MB SDRAM, 8MB Flash|
|Operating System:||AirOS 5|
|Networking Interface:||1 x 10/100 BASE-TX (Cat. 5, RJ-45)|
|Frequency Band:||2.4 GHz (Standard)|
|Supported WLAN Standards:||IEEE 802.11b: 11 Mbps
IEEE 802.11g: 54Mbps
IEEE 802.11n: 150Mbps
|TX Power:||max. 23dBm|
|RX Sensitivity:||min. -96dBm|
|Antenna:||8dBi Dual-Pol MIMO Panel Antenna|
|Beam:||60° Horizontal - 60° Vertical|
|max. Power Consumption:||5.5 Watt|
|Power Method:||Passive Power over Ethernet
PoE Injector is included
|Appliance:||In- and Outdoor|
|Dimensions:||16.3cm x 3.1cm x 8cm|
|Operating Temperature:||-30°C to +80°C|
|Operating Humidity:||5 to 95% non condensing|
Scope of delivery:
|1 x Ubiquiti 2.4 GHz NanoStation Loco M2|
|1 x 24V, 0.5A passive PoE Injector|