This 2.4GHz based WiFi Bridge LINK SET includes two LigoWave DLB Propeller-2 CPE'S. The components can beordered without any configuration or preconfigured. This PtP-Link has a capacity of 170Mbps and up to 3km range!
The DLB Propeller 2 is a wireless device designed for client and small scale base-station applications. It has a unique mechanism to do mechanical antenna parameter shifting and achieve the best performance in different operating modes (patent pending).
This product is equipped with a MIMO radio (up to 23 dBm) and 11 dBi dual-polarized antenna which make the device ideal for short to medium range wireless communication.
Our dual firmware image will allow safe software upgrades. The device will restart using the prior firmware in the event of an upgrade failure.
The DLB Propeller 2 uses an advanced and feature-rich operating system which supports bridge/router and repeater modes (repeater mode allows the product to operate as an access point and as a station at the same time). The DLB OS also supports LigoWave?s iPoll2 (proprietary wireless communication technology) to increase throughput, packet per second rate and stabilize latency on your network. It has a user-friendly HTML 5 based GUI with instant reconfiguration without a reboot, includes useful installation tools (site survey, delayed reboot, spectrum analyzer, ping, traceroute) and is compatible with our standalone and cloud based Wireless Network Management System (WNMS) - one of the most advanced management tools on the market.
The DLB Propeller 2 can be rotated to the horizontal orientation for use as a client device. This greatly reduces interference, as the main noise source is on the azimuth. Alignment is easy as only left and right movement of the device is necessary (no need to move it upwards or downwards as the antenna angle on the elevation is wide)Usage recommendation:
- PTP mode (two Propeller 2): 3 km/ 1.86 mi
- PTMP mode (Propeller 2 as a client device): 1.5 km/ 0.93 mi
- PTP full capacity mode (two Propeller 2): 1.5 km/ 0.93 mi
Maximum throughput: 170 Mbps
All LigoWave DLB series devices can be managed and monitored using WNMS (Wireless Network Management System). A single software solution simplifies a large number of tasks for network administrators. WNMS Cloud version is available for those who are not willing to run it on an in-house servers.
|Manufacturer / Product:||LigoWave / LIGODLB Propeller 2|
|Frequency Band:||2.350 - 2.550 GHz|
|Antenna:||Integrated 11dBi directional dual-polarized panel|
|H-pol beamwidth (6 dB):||70°|
|H-pol beamwidth (6 dB):||70°|
|Supported WiFi Standards:||IEEE 802.11b: 11Mbps |
IEEE 802.11g: 54Mbps
IEEE 802.11n: 300Mbps
|Operation modes:||Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)|
|Advanced Functions:||Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC)|
|Security:||WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation, UAM (web portal authentication)|
|TX Power:||max. 23dBm|
|RX Sensitivity:||min. -91dBm|
|TCP/IP Throughput:||170 Mbps|
|Radio mode:||MIMO 2x2|
|Channel Size:||5, 10, 20, 40 MHz|
|Modulation Scheme:||802.11 b: DSS (CCK, DQPSK, DBPSK)|
802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
|Error Correction:||FEC, Selective ARQ|
|Networking Modes:||Router, Bridge|
|Networking:||NAT, static routing, firewall, port forwarding, VLAN, traffic shaping|
|WAN Modes:||Static IP, DHCP client, PPPoE client|
|Networking Interface:||1 x 10/100 BASE-TX (Cat. 5, RJ-45)|
|max. Power Consumption:||4.5 Watt|
|Power Input:||12-24V passive PoE|
(24V PoE Injector included)
|Appliance:||In- and Outdoor|
|Dimensions:||17.5cm x 6.5cm x 2.9cm|
|Operating Temperature:||-40°C to +65°C|
|Operating Humidity:||0% to 90% (non-condensing)|
Scope of delivery:
|2 x LigoWave LigoDLB Propeller 2|
|2 x 24V Passiv Power-over-Ethernet Injector|
|2 x Mounting Equipment|
|Shipping weight:||2,20 Kg|
|Product weight:||1,88 Kg|