LigoWave LigoDLB Propeller 2 | 2.4GHz AP / CPE, 802.11N, iPoll2, Outdoor, 11dBi

  • Available now!
  • Item no.: ART6114
  • Shipping weight: 1,10 kg
  • Product weight: 0,94 kg
  • Shipping time: 1 - 3 workdays
  • Our price: 59,99 €
  • including 19% VAT., plus shipping (Standard)
Loading ...


LigoWave DLB Propeller 2 - 2.4GHz WiFi CPE, 11dBi Panel Antenna
The DLB Propeller 2 is a new generation wireless device designed for client and small scale base-station applications. It has a unique mechanism to do mechanical antenna parameter shifting and achieve the best performance in different operating modes (patent pending).

This product is equipped with a MIMO radio (up to 23 dBm) and 11 dBi dual-polarized antenna which make the device ideal for short to medium range wireless communication.

Our dual firmware image will allow safe software upgrades. The device will restart using the prior firmware in the event of an upgrade failure.

The DLB Propeller 2 uses an advanced and feature-rich operating system which supports bridge/router and repeater modes (repeater mode allows the product to operate as an access point and as a station at the same time). The DLB OS also supports LigoWave?s iPoll2 (proprietary wireless communication technology) to increase throughput, packet per second rate and stabilize latency on your network. It has a user-friendly HTML 5 based GUI with instant reconfiguration without a reboot, includes useful installation tools (site survey, delayed reboot, spectrum analyzer, ping, traceroute) and is compatible with our standalone and cloud based Wireless Network Management System (WNMS) - one of the most advanced management tools on the market. The DLB Propeller 2 can be rotated to the horizontal orientation for use as a client device. This greatly reduces interference, as the main noise source is on the azimuth. Alignment is easy as only left and right movement of the device is necessary (no need to move it upwards or downwards as the antenna angle on the elevation is wide)

Usage recommendation:
- PTP mode (two Propeller 2): 3 km/ 1.86 mi
- PTMP mode (Propeller 2 as a client device): 1.5 km/ 0.93 mi
- PTP full capacity mode (two Propeller 2): 1.5 km/ 0.93 mi

Maximum throughput: 170 Mbps

All LigoWave DLB series devices can be managed and monitored using WNMS (Wireless Network Management System). A single software solution simplifies a large number of tasks for network administrators. WNMS Cloud version is available for those who are not willing to run it on an in-house servers.


Technisches Datenblatt

Technical Data:

Manufacturer / Product: LigoWave / LIGODLB Propeller 2
Frequency Band: 2.350 - 2.550 GHz
Antenna: Integrated 11dBi directional dual-polarized panel
Polarisation: Dual linear
Cross-pol Isolation: 23dBi
VSWR: max. 1.5
H-pol beamwidth (6 dB): 70
H-pol beamwidth (6 dB): 70
Elevation beamwidth: 35
Supported WiFi Standards: IEEE 802.11b: 11Mbps
IEEE 802.11g: 54Mbps
IEEE 802.11n: 300Mbps
Operation modes: Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)
Advanced Functions: Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC)
Security: WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation, UAM (web portal authentication)
TX Power: max. 23dBm
RX Sensitivity: min. -91dBm
TCP/IP Throughput: 170 Mbps
Radio mode: MIMO 2x2
Channel Size: 5, 10, 20, 40 MHz
Modulation Scheme: 802.11 b: DSS (CCK, DQPSK, DBPSK)

802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
Error Correction: FEC, Selective ARQ
Networking Modes: Router, Bridge
Networking: NAT, static routing, firewall, port forwarding, VLAN, traffic shaping
WAN Modes: Static IP, DHCP client, PPPoE client
Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45)
max. Power Consumption: 4.5 Watt
Power Input: 12-24V passive PoE
(24V PoE Injector included)
Appliance: In- and Outdoor
Dimensions: 17.5cm x 6.5cm x 2.9cm
Weight: 0.094 kg
Operating Temperature: -40C to +65C
Operating Humidity: 0% to 90% (non-condensing)

Scope of delivery:

1 x LigoWave LigoDLB Propeller 2
1 x 24V Passiv Power-over-Ethernet Injector
1 x Mounting Equipment

Related products