JARFT

This antenna cable of type RF-240 is a low attenuation and high quality coaxial antenna cable and is supplied with the plug combination N male plug to RP-SMA male plug in the desired length. The cable is UV and water resistant and can be used for outdoors applications. The antenna cable is assembled individually for you in our company. Due to the low attenuation (double shielding) and the high bending radius, the cable is very well suited for WiFi, LoRa, GSM , 2G, 2G, 4G and 5G frequency bands and applications up to 6GHz where a flexible cable is required.

This antenna cable of type RF-240 is a low attenuation and high quality coaxial antenna cable and is supplied with the plug combination RP-SMA male to RP-SMA female in the chosen length. The cable is UV and water resistant and can be used for outdoors applications. Due to the low attenuation (double shielding) and the high bending radius, the cable is very well suited for WiFi, LoRa, GSM , 2G, 2G, 4G and 5G frequency bands and applications up to 6GHz where a flexible cable is required. This connector constellation is particularly suitable for use as an extension cable.

The antenna cable of the type RF-240 is a low attenuation, high quality and inexpensive antenna cable. Due to the low attenuation (double shielding), the cable is very suitable for WiFi, LoRa, GSM, 3G, 4G or 5G frequency bands. You can use our cable configurator to order the cable in different lengths with different plugs. Simply select the connector and length. We then assemble the cable by hand. In this way we can respond to individual requests and always guarantee a very high quality.

This cavity bandpass filter is specially designed for the LoRa / Helium frequency band and impresses with its very good technical parameters. By using this filter, interfering signals from other frequency bands, such as the 4G 800MHz frequency band, are filtered out and attenuated very efficiently. In this way, signals from much greater distances can be received and processed with little interference. Especially the good signal suppression and the low insertion loss of less then 1dB perform extremely well with this model. Compared to a SAW filter, this cavity filter has significantly better performance and delivers a much better result.

This modification kit allows you to equip your FritzBox or Speedport router with 2.4 GHz, 7dBi omnidirectional WiFi antenna.

This modification kit allows you to equip your FritzBox or Speedport WiFi router with 2.4 GHz, 7dBi omnidirectional WiFi antenna.

2.5m antenna cable in twin / dual design with N male to SMA male connector. Flexible, high-quality and cost-effective. Especially suitable for use with an 4G or 5G antenna and a corresponding router. An example view of an SMA connector on a router on can be found in the product images.

This modification kit allows you to equip your FritzBox or Speedport router with 2.4 GHz, 9dBi omnidirectional WiFi antenna. The FritzBox and Speedport routers normally have WiFi antennas with a gain of 2dBi which are fixed permanently to it. After doing the modification with our modification kit you will have a WiFi antenna with a gain of 9dBi instead of the fixed 2dBi antenna. This helps you to increase the range of the wifi signal.

5m antenna cable in twin / dual design with N male to SMA male connector. Flexible, high-quality and cost-effective. Especially suitable for use with an 4G or 5G antenna and a corresponding router. An example view of an SMA connector on a router on can be found in the product images.

This modification kit allows you to equip your FritzBox or Speedport router with 2.4 GHz, 9dBi omnidirectional WiFi antenna. The FritzBox and Speedport routers normally have WiFi antennas with a gain of 2dBi which are fixed permanently to it. After doing the modification with our modification kit you will have a WiFi antenna with a gain of 9dBi instead of the fixed 2dBi antenna.

The JARFT 4G directional panel antenna has a performance gain of 14dBi, is designed for the 800MHz / LTE800 frequency band. Thanks to the stron gain, you can significantly strengthen your 4G connection. The your antenna is suitable for use with an 4G router and can also be used as an outdoor antenna thanks to the weatherproof housing. Please note that this your antenna is only designed for the 800MHz band.

10m antenna cable in twin / dual design with N male to SMA male connector. Flexible, high-quality and cost-effective. Especially suitable for use with an 4G or 5G antenna and a corresponding router. An example view of an SMA connector on a router on can be found in the product images.

JARFT J1800-17-DOMPA 4G directional antenna has a gain of 17dBi and is designed for the 1800MHz / LTE1800 frequency band. The powerful antenna can significantly increase the performance of your 4G connection. It is suitable for use with 4G router and can also be used as an outdoor antenna due to its weatherproof design. Please note that this 4G antenna is designed exclusively for the 1800MHz band.

JARFT J2600-17-DOMPA 4G directional antenna has 17dBi gain and is designed for the 2600MHz / LTE2600 frequency band. Using this antenna amplifies your 4G connection and helps to reach the maximum 4G / LTE speed. The weatherproof design allows the use it as 4G outdoor antenna.

5m antenna extension cable in twin / dual version with SMA male plug to SMA female plug connectors. Flexible, high-quality and cost-effective. Especially suitable for extension of existing 4G / 5G antenna cable.

JARFT Multiband 4G directional antenna has a gain of up to 14dBi, supporting all 4G frequency bands (800MHz, 1800MHz, 2600MHz). The antenna can be used universally for all 4G providers and willl improve your data connection clearly. The weatherproof design makes it easy to use the antenna outdoors. It is recommended that the 4G antenna is installed outdoor with free line of sight to the transmitter station.

10m antenna extension cable in twin / dual version with SMA male plug to SMA female plug connectors. Flexible, high-quality and cost-effective. Especially suitable for extension of existing 4G or 5G antenna cable.

JARFT multi-band 4G omnidirectional antenna delivers up to 12dBi of gain, covering all 4G frequency bands used in and Europe (800, 1800, 2600 MHz). The 4G omni antenna can be used universally and does not need to be aligned separately due to the omnidirectional characteristics. By using the 4G multiband antenna you can amplify your 4G connection.

Antenna cable type H155 in twin / dual version. Flexible, reliable with fair pricing. Especially suitable for use as an extension or connection between 4G or 5G antenna and router. Simply select the connector and length. The cable is assembled by us. So we can respond to individual requests and always guarantee a very high quality.

The flat cable / window cable is supplied with the connector combination RP-SMA male plug to RP-SMA female socket and is therefore ideally suited for use in the area of WiFi or LoRa. Simply place the flat cable in the window frame with the window open and carefully close the window again.

This ultra flat window cable / window feed-through has a length of 40cm and is equipped with an SMA male plug and an SMA female socket. This makes the cable ideal for 3G, 4G or a 5G antenna. Simply place the flat cable in the frame with the window open and carefully close the window again.

The RF-240 coaxial antenna cable is a very low-loss, high-quality antenna cable. Due to the low attenuation (double shielding) the cable is very well suited for the WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz. The RF-240 cable is cut and delivered by the meter.

The RF-240 coaxial cable is a high quality and super low loss coax cable which can be perfectly used for appliances up to 6GHz (GSM, 3G, 4G, WiFi frequencies). The RF-240 cable is delivered rolled up as a 100m reel.

The coaxial antenna cable type H-155 is a flexible low-loss antenna cable. The cable has double shielding and is well suited for applications up to 3 GHz. The H-155 is sold by meter.

The coaxial antenna cable type H-155 is a flexible low-loss antenna cable. The cable has double shielding and is well suited for applications up to 3 GHz. The H-155 cable is delivered rolled up to 100m.

This modification kit allows you to equip your FritzBox or Speedport router with 2.4 GHz / 5GHz dual band 5 / 7dBi omnidirectional WiFi antenna. Easy and simple WiFi antenna modification for your FritzBox or Speedport DSL Router