Interline IP-G10-F2458-HV-M - 2.4/5GHz Dualband Panel Antenna, 802.11ac, 4x4 MIMO, 10dBi
This WiFi ANEL antenna is designed for installation in WAVE2 and the AC MU-MIMO 4x4 (four independent streams), multiplexing time-space technologies. The antenna operates in two frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. Specially designed arrays of radiators with low self capacitance guarantee correct operation with a high degree of encoding - 256 QAM, which is used in such systems. Low capacitance does not introduce blurring of digital signals and help to avoid appearance of parasitic currents and reflections.
It is dedicated for indoor use, warehouses, production facilities. The housing is made of ABS which is high impact resistant, also resistant to many chemicals (acids, bases, salts) that may occur in industrial plants. The back-plate is powder-coated and cured at high temperature to provide many years of trouble free operation.
The WiFi Panel Antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included.
The WiFi Antenna has 4 x 0.9m cable with N male connector. Suitable coax antenna cables are available at our Webshop.
|Type of Antenna:||Directional Panel Antenna|
|Polarisation:||Horizontal / Vertical (Dual-Pol)|
|Beam width:||45° Horizontal
|Front to back ratio:||min. 25dB|
|XPD (Cross Polarization Discrimination):||min. 18dB|
|Cable / Connector:||0.9m / N male|
|Appliance:||In- and Outdoor|
|max. Windload:||50N (@170km/h)|
|Dimensions:||22.5cm x 22.5cm x 3.2cm|
|Color:||White / Grey|
Scope of delivery
|1 x 2.4 / 5 GHz DualBand 10dBi Directional WiFi Panel Antenna | Interline IP-G10-F2458-HV-M|
|1 x Mounting kit with angle bracket and u-clamp for 30-50mm handles|