This modification kit allows you to equip your FritzBox or Speedport router with an external RP-SMA antenna connector.
The FritzBox and Speedport routers normally have WiFi antennas which are fixed permanently to it. After doing the modification with our modification kit you will have an external antenna connector instead of a fixed antenna. You can now use a WiFi antenna of your choice at your FritzBox / Speedport Router for example in order to increase the range, using an outdoor antenna or to build up a point to point connection by using an directional antenna.
The modification is quite easy! Here you find our installation guide!The modification set can be used for the following models:
- FritzBox 3020, 3030, 3050, 3070
- FritzBox 3130, 3031, 3170
- FritzBox 3270*, 3272
- FritzBox 6360*
- FritzBox 7050
- FritzBox 7140, 7141
- FritzBox 7170
- FritzBox 7240*
- FritzBox 7270**, 7272*
- Speedport W500V*, W501V
- Speedport W700V, W701V, W721V
- Speedport W900V
* This model has a MIMO antenna system with two or three antennas. All antennas have to be treated equal. You have to modify all antennas.
** In hardware revision 1 and 2 (see backside of device), this model has a multi antenna system with three antennas. All antennas have to be treated equal. The antenna in the middle is a DECT and not a WIFI antenna. So you only have to modify the two outer antennas. In hardware revision 3, this device has two visible antennas. The DECT is not visile anymore. You have to odify the two visible antennas.
|Product:||Coaxial Pigtail / Modifcation kit|
|Connectors:||U.FL to RP-SMA male connector with case-clip|
Scope of delivery:
|1 x FritzBox, Speedport Modification kit|
|Shipping weight:||0,15 Kg|
|Product weight:||0,02 Kg|