This omnidirectional WiFi antenna is designed for the 2.4 GHz ISM frequency band (WiFi standard) and supports all established WiFi standards (IEEE 802.11 b/g/n).
Omnidirectional antennas are characteristically constructed for serving the WiFi signal to many clients in different directions. Due to the wide beam-width it is covering a large area. It will be typically used on base stations (e.g. DSL Router, Access Point, Hot-Spot Systems).
This antenna has a gain of 14dBi and can build up connections on middle distances, covering a large area around the antenna.
The bottom side of the antenna includes a weatherproof housing where any WiFi components can be mounted. They can be connected directly to the antenna via the short integrated 20cm pigtail with RP-SMA female plug. The housing will be closed with screws and a watertight ring
The enclosure of the antenna is made of solid plastic. The robust and UV resistant construction is weatherproof. Due to this, the antenna can be used for in- and outdoor appliances.
A mounting kit (u-clamp for 30-50mm diameter handles) to install the antenna on a mast, pole or wall handle is included.
The antenna is designed for mast/pole or wall handle installation (see mounting hardware). A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included.
The antenna has an internal 30cm cable wit RP-SMA female connector.
Our tip: You get the highest range and the best performance if you have a free line of sight between the antennas which build up a WiFi connection.
|Type of Antenna:||Omnidirectional Antenna|
|Frequency:||2400 - 2485 MHz
(IEEE 802.11 b/g/n)
|Beam width:||380° Horizontal
|Connector:||20cm cable with RP-SMA female connector|
|Appliance:||In- and Outdoor|
|Max input power:||50 Watt|
|Operating Temperature:||-20° to 65° C|
|Dimensions:||20cm x 15cm|
Scope of delivery
|1 x 2.4 GHz, 14dBi Omnidirectional WiFi Antenna|
|4 x mounting pads, 1 x waterproof cable feedthrough|
|1 x Mounting kit with u-clamp for 30-50mm handles|