This directional WiFi antenna is designed for the 2.4 GHz frequency band (WiFi standard) and supports all established WiFi standards (IEEE 802.11 b/g/n).
Directional antennas are characteristically constructed for point-to-point and/or point-to-base connections. Due to the strong direction of the signal, this type of antenna generally has a high range.
This antenna has a gain of 18dBi and can build up connections on high distances.
The rear side of the antenna includes a weatherproof housing where any WiFi components can be mounted. They can be connected directly to the antenna via the short integrated 20cm pigtail with RP-SMA female plug. The housing will be closed with screws and a watertight ring
The enclosure of the antenna is made of solid plastic and stainless steel. The robust and UV resistant construction is weatherproof. Due to this, the antenna can be used for in- and outdoor appliances.
A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) to install the antenna on a mast, pole or wall handle is included.
The antenna is designed for mast/pole or wall handle installation (see mounting hardware). A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included.
Our tip: You get the highest range and the best performance if you have a free line of sight between the antennas which build up a WiFi connection.
|Type of Antenna:||Directional Panel Antenna|
|Frequency:||2400 - 2485 MHz
(IEEE 802.11 b/g/n)
|Polarisation:||Horizontal or Vertical (Linear)|
|Beam width:||13° Horizontal
|Connector:||20cm Pigtail with RP-SMA female plug|
|Appliance:||In- and Outdoor|
|Max input power:||100W|
|Max wind load:||14,5 N|
|Operating Temperature:||-30° to 75° C|
|Dimensions:||25cm x 20cm x 5.5cm|
|Internal Dimensions:||22.5cm x 17cm x 3.2cm|
Scope of delivery
|1 x 2.4 GHz, 18dBi Directional WiFi Panel Antenna with enclosure|
|4 x mounting pads, 1 x waterproof cable feedthrough|
|1 x Mounting kit with angle bracket and u-clamp for 30-50mm handles|